The first national system of pipes and brass fittings
15 year warranty

The most robust, flexible and easy to assemble construction based on PE-XA, PEX / AL / PEX pipes and certified brass fitting

The Heat-Pex Classic system includes PE-Xa and Pex / Al / Pex pipes, as well as a wide range of brass fittings of the original production with a maximum safety factor (coefficient> 1.5) manufactured in Ukraine in accordance with ISO 9001-2009 and Ukrainian standards DBN .В2.5-67: 2013. Compatibility and reliability of the system of pipes and brass fittings Heat-Pex was tested with "5000 cycles" test and received the highest rating, confirmed by the certificate of quality.

Purchasing HEAT-PEX system YOU RECEIVE:

  • The most robust, flexible and easy to assemble construction based on PE-XA, PEX / AL / PEX pipes and certified brass fitting;
  • Fittings are made of corrosion-resistant brass with a copper content of up to 62%, providing good structural and corrosive properties with a wide range of operating temperatures, with the storage of stability of the metal structure in the conditions of use of technical liquids;
  • 15 year warranty from manufacturer;
  • The best price for set of materials, which quality is guaranteed by international and national quality certificates;
  • A wide range of pipe diameters and brass fittings to them;
  • Complete adaptation to water and heat supply in Ukraine, that is the presence of excellent structural and anticorrosive properties;
  • Good quality support from the manufacturer.

PIPE FOR WATER SUPPLY SYSTEMS
AND RADIATOR HEATING OF PEX-A

Pipes from PEX-A are universal (as they can be used both for heating and for water supply) and are made of high density polyethylene, cross-linked with hydrogen peroxide. The reaction of the cross-linking happens in the extruder during the formation of the tube. The cross-linking procedure allows to get uniform transverse connections on all the thickness of wall even if it is heavy wall tube.

The molecules of polyethylene are combined into a three-dimensional structure. As a result of this process, such properties of the material as heat resistance, resistance to high pressure, impact strength at low temperatures and resistance to cracking at a voltage improve.

Oxygen barrier is made of ethylene-vinyl alcohol - a polymer with the best protective characteristics. Requirements to the standards DBN V.2.5.- 67: 2013 in relation to oxygen barrier property are largely overfulfilled. In addition, the adhesive layer between the pipe and the barrier layer provides a firm bond. The layer of ethylene-vinyl alcohol is insoluble in water and has a significant reserve of density in relation to resistance to abrasion and resistance to atmospheric influences, which increases the resistance of the pipe in harsh conditions at the construction.

SCOPE OF APPLICATION

  • drinking water supply system;
  • radiator heating system;
  • surface heating system.

PIPE FOR WATER SUPPLY SYSTEMS
AND RADIATOR HEATING PE-XC / AL / PEX

Pipes PE-Xc / Al / PEX are universal (so they can be used both for heating and for water supply).

This type of pipe consists of five layers. The inner tube consists of cross-linked polyethylene PE-Xc (after formation polyethylene tube is cross-linked under the influence of the electron beam).

The middle layer is laser-welded aluminum (it is anti-diffusion protection and contributes to lower linear elongation).

The outer layer consists of PE-Xc or PE-Xb depending on the diameter. All layers are glued together with high-quality glue.

The minimum pipe installation temperature for PE-Xc / Al / PEX pipe is 10°C.

SCOPE OF APPLICATION

  • drinking water supply system;
  • radiator heating system;
  • surface heating system.

PIPE FOR UNDERFLOOR
AND WALL HEATING PEX-A

PEX-A pipes for the underfloor heating system are made of high density polyethylene, crosslinked with hydrogen peroxide. The reaction of the cross-linking happens in the extruder during the formation of the tube. The cross-linking procedure allows to get uniform transverse connections on all the thickness of wall even if it is heavy wall tube.

The molecules of polyethylene are combined into a three-dimensional structure. As a result of this process, such properties of the material as heat resistance, resistance to high pressure, impact strength at low temperatures and resistance to cracking at a voltage improve.

Oxygen barrier is made of ethylene-vinyl alcohol - a polymer with the best protective characteristics. Requirements to the standards DBN V.2.5.- 67: 2013 in relation to oxygen barrier property are largely overfulfilled. In addition, the adhesive layer between the pipe and the barrier layer provides a firm bond. The layer of ethylene-vinyl alcohol is insoluble in water and has a significant reserve of density in relation to resistance to abrasion and resistance to atmospheric influences, which increases the resistance of the pipe in harsh conditions at the construction.

SCOPE OF APPLICATION

  • surface heating system.

HEAT-PEX CLASSIC SYSTEM FITTINGS

Installation of heating and water supply Heat-PEX systems can be made using two types of pipes and one type of corrosion-resistant brass fittings and sleeves. The feature of Heat-PEX system fittings is the connection that have so-called "Lock". It provides a reliable and durable connection.

THE BENEFITS OF HEAT-PEX SYSTEM FITTINGS

  • absence of auxiliary sealing elements;
  • absence of reduction of the conditional diameter on the fitting;
  • high corrosion resistance;
  • brass corrosion-resistant fittings with copper content up to 62%;
  • fittings made of brass suitable for drinking water supply, with a lead content <2%;
  • ease of visual control of connection implementation;
  • the only tool are tension sleeves, regardless of the type of connecting pipe;
  • the possibility of conducting hydraulic tests immediately after work;
  • resistance to mechanical and temperature loads;
  • environmentally friendly production, the possibility of recycling.